Date:         Wed, 2 Jan 2002 09:41:50 -0800
Reply-To:     Randy Bergum <organslave@EARTHLINK.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Randy Bergum <organslave@EARTHLINK.NET>
Subject:      Re: Rear trailing arm bushing install?
Comments: To: Double-Cab Guy <doublecabguy@POWERSURFR.COM>
Content-Type: text/plain; charset=us-ascii

Hi All:
    I use LIBERAL amounts of dishwashing soap on the new bushing, like
mounting a car tire.  Don't use silicone or lithium grease - these will not
dry out fast enough and the bushing *may* not stay seated.

The bushings are tough, and can take a surprising amount of deformation.  Use
a large vise and line things up, then squeeze away like a 20 ton press.  You
may need to use a socket and push slightly past the centered point, then
press the opposite direction and position it correctly.

Whilst the arms are out, maybe it's time to do other services, like rear
bearings or???

Randy Bergum
1990 Carat


Double-Cab Guy wrote:

> Hello Volks,
>
> I am having difficulty installing new bushings in the rear trailing arms.
> Can anyone give me some advice, hints or suggestions on this job?
>
> Thanks
> Glen