I have a set of these brackets from Dave Marshall, but they will not work with the fiberglass bumbpers..... Please p-mail me if interested, first $15.00 takes it! Scott Grillo '91 Carat <snip> VW used a sort of zigzag bend bit of steel that attached to these holes (via threaded inserts) and it zigzagged back and up between the bumper and body. I bent my own bit of metal and used the outer most groups of three holes, was able to access the inside of the bumper submount (from holes in the bottom) so I did not need to use threaded inserts. D. Marshall I thinks still sells the stock bits. <snip> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.