Got it. Thanks for the clarification. Todd John Clavin wrote: > At 03:30 PM 1/12/02 -0800, Todd Last wrote: > >It also looks at things such as the power steering pressure switch. > >If you look at the wiring diagram on page 97.138 (Air Conditioning) > >You will see the A/C compressor cut-out relay is wired to the Idle stabilizer > >valve. > > Yes, but it is important to keep terminology and model years straight when > discussing this. Pre-'86, there is no Idle Stabilizer *Valve*, only the > electronic Idle Stabilizer connected to the distributor circuitry. The > former may connect as you described on '86 and later models, but the latter > on the '83-'85 models does not. > > Regards, > John Clavin |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.