Date:         Thu, 10 Jan 2002 12:36:56 -0600
Reply-To:     Terry Kay <CTONLINE@WEBTV.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Terry Kay <CTONLINE@WEBTV.NET>
Subject:      Re: Soft lifters (was: clarify .006 on lifters)
Comments: To: Robert Donalds <bostneng@FCL-US.NET>
In-Reply-To:  Robert Donalds <bostneng@FCL-US.NET>'s message of Thu, 10 Jan
              2002 07:40:18 -0500
Content-Type: Text/Plain; Charset=US-ASCII

Blake, and all,

Use a pint of Marvel in you oil when you change your oil--it will keep
everything inside your engine clean and spinning free---like the rings
for instance---and it will prevent any gums and varnishes from forming,
causing the lifter's to hang up----
and the inside of your engine will be clean as new----
A clean engine--is a Happy engine---

While Bob noted to use it primarily prior to an oil change, you are not
reaping the total benit of the product.

I have been using it for over 30 years, and have never had a lifter
clack, or rings hang up in any engine---

From early 50's Caddy's to Pontiac's---all had lifter problem's---I had
zip, nada.

Dump a pint into the gine--run it for 3000 miles, and I'll bet the
"clack" will be minimal---

Good Stuff if used as directed----

Later,

Terry


E-mail message From Bob Donalds---

I am a real believer in marvel mistery oil a day or so before the oil is
changed. it has time and time again proven itself to me as a great way
to quiet down lifters Bob
Bob