Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (January 2002, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 13 Jan 2002 13:42:35 -0800
Reply-To:     Steve Arbaugh <sneakers@OZ.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steve Arbaugh <sneakers@OZ.NET>
Subject:      Re: Does a broken mirror bring bad luck?
In-Reply-To:  <134043DE-084C-11D6-A632-0003930886DE@yahoo.com>
Content-Type: text/plain; charset="iso-8859-1"

What I've seen done for fixing the mirrors is not using the hex stud at all. Find a bolt that's about the same diameter with fairly coarse threads and use that instead. Rather than push the hex thing back in, thread the bolt into the hole where the stud was, couple washers under the bolt head, and tighten it down. Seems better to me than the hex thing that will just come loose again.

Course, I learned about this after buying another mirror..

Steve '85 westy kent, wa

-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Graham Fitter Sent: Sunday, January 13, 2002 9:36 AM To: vanagon@GERRY.VANAGON.COM Subject: Does a broken mirror bring bad luck?

Hi all,

So I was driving along a while back and the mirror on the driver's door went all floppy. Indeed, it was so floppy I had to keep the window open and held the mirror in place until the next exit on the interstate. Then I removed the mirror, tightened up the nut to increase the friction and put the mirror back on the door. The mirror flopped.

Fine, I thought, and tightened up the nut even more, then the whole thing came apart in my hands. It turns out that the bolt holding the ball joint together isn't really a bolt, but a hexagonal stud hammered into a hexagonal hole in the mirror mount, and held in place by friction. If the nut is tightened too much to overcome a really floppy mirror, the bolt is just pulled out of its hole and the whole thing falls apart.

Not having a mirror is a really bad thing on a Massachusetts highway, so as a last resort, I took the mirror off the passenger's door and put it on the driver's door. The mirror is obviously a different orientation, and doesn't fold flat against the door, but does the job just fine.

In fact, I think its better this way round - the overall backwards visibility on the highway is much better than before - and I'm not going to switch the mirrors over when I fix the broken one :-)

Cheers, Graham

p.s. Has anyone had any success securing the hexagonal shaped stud in the hexagonal shaped hole? Would glue work?

_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.