Take a long metal straight edge ( I use a steel yard stick) place it between the two pullies. take a second straight edge and measure down (the distance recomended) in the middle of the two pullies 10 to 15mm and tighten the alt down. On my ruler i have measured this out and i have attached the second ruler at he disired depth so all i have to do is loosen /place the ruler,this puts pressur down for the deflection and tighten down the alt. Fast and quick it is right or it is not . |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.