Date:         Wed, 16 Jan 2002 07:33:53 -0800
Reply-To:     Dana Morphew <kadm@PUGETSOUND.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dana Morphew <kadm@PUGETSOUND.NET>
Organization: Dana's Mobile Carpet Steam
Subject:      Re: Diesel injection pump setting
Content-Type: text/plain; charset=us-ascii

The mech. is translating millimeters into degrees.  The spec. of 0.86 mm. BTDC.
is correct.

-Dana-

Steven Denis wrote:
>
> In a message dated 1/15/02 10:27:26 PM Eastern Standard Time,
> TeresaRein@AOL.COM writes:
>
> << (86 degrees according to the
>  manual). >>
> the pump is not set this way..it's set by pump plunger stroke vs. TDC
>
> steve

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.