Been there, smelled the burning plastic. When it happened to me, I knew there was a problem with the fan pulling too much current (bearings going bad?), but didn't have time to fix that. So, I fixed the symptom by replacing the stock switch with a big ol' high-powered switch from Radio Shack. I took apart the old switch, gutted it, and stuck the new switch through the old hole. Wire it up and go. Someday I will pull the dash and address the fan problem, or try a fancy relay setup, but for now a big burly new switch is working. Luckily, here in Phoenix I don't use the defroster/heater too much. Bill Marshall 85 GL Tiico |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.