#10 should be limited to ~30 Amps. #8 ~50. Dennis -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Dana Morphew Sent: Thursday, January 31, 2002 8:53 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: Electrical upgrades There is a huge (@ #0 or #00) from the starter to the battery on my '90. I ran a #4 from the alternator to the starter, and, from there, #10 or so can be run forward for the lights. -Dana- ... > upgrade would be to install additional wire capacity from the > alternator. The factory wiring is terribly inadequate for the job at > hand. To fully utilize the capacity of the 90 amp alternator, you need a > 4 gauge wire. That size is a bit balky and hard to terminate on the > alternator. My fix is to install#6 or #8 from the alternator to the feed > on the fuse box. This makes a noticeable difference in the performance > of all the accessories. This new feed can then be used with the relay > upgrade for the lights or what ever you need it for. Also helps to > supply adequate capacity for charging an auxiliary battery. > > Dennis |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.