David et all, I've wondered wether the long (relatively) wire run from the alt to the dash, and the (most likely) less than perfect connector just forward of the pass. side tail light would contribute enough resistance to raise the required "excitation" rpm. Alistair
on 31/1/02 2:34 PM, you wrote:
> Glad they're not talking about me (the cranky guy from Rhode Island). <g> > > But FWIW, you're right. The old DC generators had a residual core > magnetism that was necessary to remind them which direction to charge in, > but alternators (except the "self-exciting" type) rely on an input current > on the D+ terminal to energize the field enough to begin charging. The rpm > at which this happens appears to be dictated by the amount of current you > supply to the D+ terminal, other things being equal. So it appears to be a > deliberate design choice by VW when they specified the bypass resistance > that parallels the LED in the panel. Hanging relays on that line ought to > raise the required rpm by diverting some of the current intended for the > field (though probably not by much). > > Ref. Bosch Automotive Handbook p. 809ff. > > david > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.