-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf Of Mark Ingalls Sent: Monday, January 28, 2002 7:06 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: '85 (Digijet) Hall Sensor Symptoms
>>>Would heat cause it to fail, then work later on? I thought at the time it was a too lean setting (I had leaned out the AFM a few notches), the altitude (this was at Shenendoah National Park, Skyline Drive), or possible the timing being too far advanced >>>>
If the hall sender is working, you will see your tach 'pulse' while the starter is cranking.
Mark Ingalls 85 GL |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.