Thanks to several list members I figured out how to remove the black license plate housing. I discovered it helps to have the hatch opened as the housing can be better removed if the rubber door seal is lifted for a better view. That light bulb housing takes some effort to get off but it is easily removed with proper effort. The intermittant light bulb shorting out was a continuing mystery so I cleaned all connections and terminals with that CLR kitchen cleaner (Calcium, Lime & Rust remover.) I also roughed up all connecting surfaces with fine sandpaper to create a better connection. Still no lights but when fiddling with them the bulbs would light up now and then. I decided to try new light bulbs. Presto! Working perfectly with no shorts or intermittant lights on or off mystery. It appears my old bulbs were faulty or just old & weary. New bulbs would probably have worked without cleaning everything but it is good to know that all connections and terminals are clean as well. William Polowniak 1989 Vanagon GL 1988 Mercedes 300 SE |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.