Well, a 13mm wrench that accidentally shorts the terminals works as both a remote starter and an arc welder. Not that I'd know.. <g> bmc :) "Faith will move mountains, but you'd better bring a shovel...."
> From: Gerald Masar <azsun99@EARTHLINK.NET> > Reply-To: Gerald Masar <azsun99@EARTHLINK.NET> > Date: Mon, 4 Feb 2002 13:47:07 -0700 > To: vanagon@GERRY.VANAGON.COM > Subject: compression test > > Hello All, > I have just done a preliminary compression test on my '90 Westy with 140K > miles. > The figures are: #1=118, #2= 125, #3=116, #4=127. > The engine had cooled some when I finally ran the test, but do these figures > sound > about right for an > engine with 140K miles? > > Can someone tell me which terminal (looking at solenoid from engine > compartment) and > maybe an easy way to connect a remote starter, so I can watch the gauge while > cranking? > > Thanks, > Jerry > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.