Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (February 2002, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sun, 3 Feb 2002 11:42:39 -0800
Reply-To:     gary hradek <hradek@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         gary hradek <hradek@YAHOO.COM>
Subject:      Idle Speed Stabilizer
Content-Type: text/plain; charset=us-ascii

John, I have a Bentley. I am just checking out a used part that I purchased from "notajeep" as a spare. My rpm runs high at times(about 2k) but always drops to 1k. I was hoping a new relay might solve that. The one from notajeep was 251 907 393D and my old one was 251 907 393B. John,you were the only one on the list that clued me into the fact that the relay and plug can be removed together from the hanger. In this way you can slide the whole assembly underneath and out the hole of the taillight so that you can more carefully wiggle out the relay and replace with a different one. Thatnks to everyone who gave me directions but especially John who gave that little extra information about the hanging relay. It is safe to say that most anyone can do this job and it is a good reason to have a spare relay as these things sell mew for 200 dollars, Thanks to notajeep for all his hard work on supplying us with parts. gary

--- John McLean <jaymac@internetcds.com> wrote: > > > gary hradek wrote: > > > Can someone on the list confirm that I must remove > the > > right tailight on a 1987 westy to replace the ISV > > relay. Do I just remove the four screws and > slide > > the front black piece toward the outside after > > removing the lense unit? I am getting ready to > do it > > but want to know I am looking in the correct spot. > > thanks gary > > > > Gary, > > I wouldn't recommend digging into the electronics of > a Vanagon without a > reliable manual. Bentley or Haynes ( or both ). > > The Idle Speed Stabilizer is behind the right tail > light and is just > mounted with a hanger as I recall. I dont think > there are any > screws holding it in place once you have the tail > light out of the way. > > John McLean 87 Vanagon GL >

__________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.