Date:         Mon, 4 Feb 2002 10:11:02 -0800
Reply-To:     Chris Weddle <info@2WEDDLE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris Weddle <info@2WEDDLE.COM>
Subject:      Re: Swap ring/pinion in diesel trans?
Comments: To: john Runberg <jrunberg@MAC.COM>
In-Reply-To:  <B88324B7.13EA%jrunberg@mac.com>
Content-type: text/plain; charset="US-ASCII"

John,

Odds are, your existing diesel r&p ratio is 5.43 or 5.86. Here is what it
will cost to upgrade to a taller ratio:

If you have an 091 trans (1980-1983, shifts off the side of the front
housing), we sell excellent used 4.57 r&ps for $245.

If you have an 091/1 trans (1983-1991,shifts off the side of the main case),
we sell excellent used 4.83 r&ps for $245, 4.86 r&ps for $295, and 4.57 r&ps
for $395.

To do the swap you will have to completely rebuild your trans. Plan on
spending between $900 and $1250 to do the job, including the cost of the
r&p. This does not include taking the trans out of the vehicle and putting
it back in.

Regards,

Chris Weddle
Weddle Industries
700 Becknell Rd, Unit A
Goleta, CA 93117 USA
(805) 696-9665
Fax (805) 696-9667
info@2weddle.com

> From: john Runberg <jrunberg@MAC.COM>
> Reply-To: john Runberg <jrunberg@MAC.COM>
> Date: Sun, 3 Feb 2002 17:32:40 -0500
> To: vanagon@GERRY.VANAGON.COM
> Subject: Swap ring/pinion in diesel trans?
>
> How hard is it to change the ring and pinion in a diesel trans to something
> similar to the gas tranny? I just found a decent trans to replace my leaker,
> however its a diesel trans. Since I don't want to drive at 4500+ in fourth,
> the alternative is to swap the r/p or keep looking.
>
> Can I do this myself? Would a local tranny place be able to do it? What's
> the cost to have them do it? If it won't work, anyone need a diesel tranny
> (sans bellhousing)? Thoughts and opinions?
>
> John Runberg