I have found the green wire to the O/2 sensor had one to many splices/ bad connections. I know that I have to use high temp coaxial wire but where do I get it. The archive was vague. Have tried radio shack and they were of no help. Any ideas as to where? Or How about a way to shield regular wire? The repair runs from the connector and is aprox 10 inches long. Runs by the coil and plug wires so I want to be sure that I get a good signal from the sensor. Any Ideas?
Jim Morgan 86GL "Breadbox" |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.