Hi guys and gals, I recentley installed an aftermarket tachometer to my 85 1.9 AUTOMATIC. I used the bentely as a reference in hooking up the leds. I used the igition hot for the radio.. switched illumination led went to the cigarett lighter led and ground to ground. I looked up the diagram for the tachometer led in the dash cluster, Its the Green wire going into the cluster... Is this the correct connection???? Do i need to run a wire from the coil all thr way up front?? I was under the assumption that this led was already tied in and all I had to do was hook it up... the tach isn't moving...any help would be appreciated. ~tom |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.