In a message dated 2/16/02 11:17:15 PM, wrevens@MYEXCEL.COM writes: << Any body out there no what the resistance is supposed to be . . . the o2 sensor? >> I am wondering the same thing for the 2.1L heated OXS. I have a VW sensor with unknown miles of use with which the van drives well. On the other hand, I have an aftermarket Bosch (intended for a Ford, I believe) with which the van has a hunting idle. The VW OXS has a cold heater resistance of about 5KΩ while the aftermarket one reads about 12KΩ. Now, is the VW OXS still good or not? As I once asked before, does anyone know for certain what the cold heater resistance is of a new, VW-issue, 2.1L OXS? Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.