Date:         Sat, 16 Feb 2002 04:31:58 -0800
Reply-To:     Ben McCafferty <ben@KBMC.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben McCafferty <ben@KBMC.NET>
Subject:      Re: tranny boots...
Comments: To: Dana Morphew <kadm@PUGETSOUND.NET>
In-Reply-To:  <3C67D3B9.C67EBDD5@pugetsound.net>
Content-type: text/plain; charset="US-ASCII"

There's a fourth tranny boot, but I don't know the part number.  It fits on
where the shifter linkage goes into the tranny.  About 2" in diameter.
bmc  :)
"Faith will move mountains, but you'd better bring a shovel...."


> From: Dana Morphew <kadm@PUGETSOUND.NET>
> Organization: Dana's Mobile Carpet Steam
> Reply-To: Dana Morphew <kadm@PUGETSOUND.NET>
> Date: Mon, 11 Feb 2002 06:22:49 -0800
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: tranny boots...
>
> That should be 251 711 167F for the shift rod boots.
>
> -Dana-
>
> Dana Morphew wrote:
>>
>> You'll need one 251 711 167E ball joint boot, two 251 711 157F shift rod
>> boots,
>> and one 251 723 580 aft accel. boot.  Bus Depot, Vanagain, Impex, PartsBin,
>> BusBoys will
>> all likely have them.
>>
>> -Dana-
>>
>> John Gladu wrote:
>>>
>>> Where can I get the boots that cover the shifter linkage at the tranny?
>>> My '90 has three of them - two on the shift rod on either side of the
>>> mount and one that covers the ball joint.  I remember that the ball
>>> joint boot was a monster to find the last time I replaced the clutch,
>>> about five years ago.
>>>
>>> The accelerator cable boot has crumbled into o-rings as well - should
>>> I even bother replacing it?
>