The heads should be carefully check to see if they are warped, but the VW head is quite small and this is not a common problem. What you have to check are "cracks" and "dents" cause by coolant corrosion, normal wears and overheating, if those are very small the head can be "regrind" or "Re-Surface" ("dents" only) at a machine shop. (If dent are very small, some people use JB weld!!!!) Heads can be check by professional; a compression test and a leak test can be done. But like you said, if you don't have an outside leak, there is good chance that the heads are still intact. Removing the head is nothing, the only problems are the 2 bolts holding the exhaust pipe (they will probably be jammed or stuck. If you do that, pushrod seals should also be change and many other small parts. If all of that is not possible, you will need new heads. Good luck, Ben |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.