In a message dated 2/27/02 2:13:45 AM EST, andrew.grebneff@STONEBOW.OTAGO.AC.NZ writes: << It would bolt straight to the VW trans, >> This is incorrect. I have seen a removed Boxster engine. The bellhousing bolt pattern is entirely different. It uses 8 bolts to mount to the trans. Biggest problem is the reference and speed sensors for the Motronic. Adapter would not be that hard to make but the flywheel with its cutter rings would be VERY expensive. John Wessels European Motorsport Livermore, CA 94550 http://www.euromog.com |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.