Date:         Fri, 22 Feb 2002 18:07:27 -0800
Reply-To:     developtrust <developtrust@HOME.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         developtrust <developtrust@HOME.COM>
Subject:      Rear hatch strut support
Comments: To: SBWC919@aol.com
Content-Type: text/plain; charset="iso-8859-1"

I just heard from Gary Lee re: the rear hatch strut support.

PVC Electrical conduit, or similar.  3/4" ID, about 1" OD 8" long. Remove
bottom mount, slide over left strut & reattach. (Or right strut if left
handed.)

Just found mine & It works like a charm. It took me a while to figure out
that I had to open the hatch all the way to re-attach the strut after
putting the support onto it.

William

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.