Date:         Wed, 27 Feb 2002 01:58:19 +0100
Reply-To:     Robert Steven Fish <fish@SALZBURG.CO.AT>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Robert Steven Fish <fish@SALZBURG.CO.AT>
Subject:      Re: Fuel Injection Hose-----what size ID.....7mm?
Content-Type: text/plain; charset="iso-8859-1"

I was thinking about doing that very same thing....  3 of my OEM hoses have
the yellowish plastic protection sleeve on the entire length to the
injectors... ONE does not.

Is this normal? Can these be re-routed such that they do not lay directly on
the engine block, and then would not need this heat sleeve protection?

Would be great to know the size, and type (if this is a special hose, or
anything).

Thanks!

<º)))>{   <º)))>{   <º)))>{   <º)))>{   <º)))>{   <º)))>{

Robert S. Fish
Salzburg, Austria
1987 Wolfsburg Vanagon 2.1 Weekender
1987 Golf Cabriolet
1991 Golf

----- Original Message -----
From: "Smola, Tony" <TSmola@TRIBUNE.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Wednesday, February 27, 2002 1:16 AM
Subject: Fuel Injection Hose-----what size ID.....7mm?


> I'm going to replace the hoses in the engine compartment that lead from
the
> plastic piece in the firewall to the metal T and to the injectors......Is
> this 7MM ID?
>
> TIIA
>
> Malibu Tony  85' Westy 1.9L  5 degrees BTDC
>                    78' 911SC Targa
>