Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2002, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 4 Mar 2002 06:46:16 -0600
Reply-To:     Marshall <mjruskin@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Marshall <mjruskin@SHAW.CA>
Subject:      Re: dent removal ?
Comments: To: Gerald Masar <azsun99@EARTHLINK.NET>
Content-type: text/plain; charset=iso-8859-1

I suggest you try the local paintless dent repair shops in your area, if the paint itself is not damaged..

You'll be surprised at how good a job they can do for you - plus, it's cheaper than a normal body shop.

Marshall Ruskin 84 Westy ----- Original Message ----- From: "Gerald Masar" <azsun99@EARTHLINK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, March 03, 2002 09:36 PM Subject: dent removal ?

> Greetings listees, > On a recent trip, some (expletive deleted) clipped the left rear of my '90 Westy. > Don't know where it happened, maybe along a street where it was parked or someone > pulling out behind it. > Anyway, there are two dimpled creases about a quarter inch deep, running from the edge > of the hatch opening, across the vertical corner of the body, about 13" above the > bumper. There is a lightly flattened area right on the edge, connecting the two > creases. There is only the slightest smudge on the bumper, so maybe it was a truck or > bus or something with an overhang. > I can reach the area down through the vent opening, but am reluctant to hammer on it, > as it will probably only make it worse. > I have a high deductible insurance, so that is out. > Any suggestions from you body work experts, as to how I might fix it or how a body > shop would do it. There are some body shops in this small town, but I haven't taken it > to anyone yet. > > If nothing else, I will just sand the edges of the missing paint and spray it to keep > it from rusting. > Any comments will be appreciated. > Jerry


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.