Date:         Wed, 6 Mar 2002 20:25:02 EST
Reply-To:     Velvetbrown@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Chris brown <Velvetbrown@AOL.COM>
Subject:      Re: POR-15
Content-Type: text/plain; charset="US-ASCII"

       While I've had excellent results over the years with POR-15 itself,
the two Restomotive products I have been somewhat disappointed by were:
1) Their gray exhaust coating, which began burning off at the head end of
girlfriend's Volvo exhaust manifold after a few months.
2) Their epoxy putty in metal repair situations. I found it to shrink and
crack a bit and cause the rust to come back in the resulting crevices.  That
said, it works great for repairing plastic parts.
I'm pretty diligent at following their instructions, but your results may
vary.

-chris

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.