Volks, I had a lifter ticking this morning, so added a half quart of Marvel Mystery Oil to the motor (2.1L) 20 minutes of driving later, the lifter quieted down, but the darn oil buzzer kept coming on. Stopped, checked the level, fine, water temp normal, engine seemed fine on power (unlike a motor with low oil pressure) Kept doing it. If I went over railroad tracks, etc., it would go off...when I set the cruise at 3500 rpm, it would be on, and go off every so often for a minute or two then go out again.......... Stopped the van and disconnected the connector for the 2 brown oil sender wires in the engine bat. The darn thing still buzzed..How? Now, I have not put a pressure gauge on it, but it seems like some sort of short, for if I understand the circuit, the senders ground the wire at low pressure turning on the light and buzzer. If there is no ground, how can the light and buzzer work? Adam P 81 Vanagon Westy (The Brick) 70 Single Cab "Whitey" 74 Beetle "Ol Yeller" 73 Transporter (STILL at paint shop) 1988 Vanagon Wolfsburg 1984 Partsmobile (for sale) Used Vanagon Parts for sale (mostly aircooled) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.