In a message dated 3/11/02 8:26:56 PM Central Standard Time, dhaynes@OPTONLINE.NET writes O> kay, I forgot about the intake plenum. The 2.1 and many VW 1.9 rebuilds > need the later plenum chamber to fit on the case correctly. The throttle > valves are interchangeable for both plenums but the later throttle has a > larger opening for more power! > > If you are upgrading an '85 to a 2.1, you might get lucky. Mine had the larger throttle body and air plenum already. Also, I didn't change the water pump and mine hooked right up. Is there something different about an '85? I used the Jim Thompson procedures when I did it three years ago. Tom '71 Westy, '85 Westy, '91 Carat, '81 VW Diesel Pickup |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.