Date:         Wed, 13 Mar 2002 09:59:25 -0500
Reply-To:     Andrew Crighton <ac@IPRIMATE.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Andrew Crighton <ac@IPRIMATE.COM>
Subject:      Re: 2.1L Dynam oil press sys check
In-Reply-To:  <F1155NJrUhhlzuYl0gH00009f5c@hotmail.com>
Content-Type: text/plain; charset="us-ascii"

Please take my name off this mailing list.
@C

Andrew Crighton
iPRIMATE
127 Kingswood Road
Toronto, Ontario
m4e 3n4
Canada
tel: 416.694.4695
fax: 416.694.8285
email: ac@iprimate.com
web: www.iprimate.com



-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of John Patton
Sent: 12 March 2002 23:09
To: vanagon@GERRY.VANAGON.COM
Subject: 2.1L Dynam oil press sys check

Hi Folks,

The attachments depict a simple voltmeter procedure to check the 86-91
Vanagon Dynamic oil pressure warning system. The Bentley shows this
system
on pgs 90.22 to 90.29 but the trouble shooting can be very vague &
confusing. The Word document attachments to this email present what I
think
is a softer & "friendlier" method of checking this important system.
It's
important to know that I have previously submitted this information to
the
Vanagon home page and to Limbo. In both cases I was told that the
information was either "too complicated" for the usual Vanagon owner to
carry out, or that Vanagon owners are not concerned about the correct
function of this system. I finally gave up. I would appreciate your
feedback
regarding the tests.

Regards,   John







_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com