Vanagon EuroVan
Previous (more recent) messageNext (less recent) messagePrevious (more recent) in topicNext (less recent) in topicPrevious (more recent) by same authorNext (less recent) by same authorPrevious page (March 2002, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Fri, 8 Mar 2002 17:13:57 -0500
Reply-To:     "Beckham, Chip" <cbeckham@NORDSON.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "Beckham, Chip" <cbeckham@NORDSON.COM>
Subject:      Re: Alternator wobble? questions...
Content-Type: text/plain; charset="iso-8859-1"

Joe,

For what its' worth, when the alternator went on my 85 GL (1994), I installed a Bosch rebuild. The Bosch has been totally trouble-free since. I would install nothing else if the need arises to replace it again. The replacement was very easy. The only miscue I had was removing the old alternator before discovering that the pulley and fan must be swapped from the old to the new. Having no way to lock the rotor, I re-installed the old unit, tightened the belt, then broke loose the retaining nut. Other than that, it was a smooth operation.

Good luck.

Chip Beckham 85 GL Weekender

-----Original Message----- From: Joe Tu [mailto:joetu@PACBELL.NET] Sent: Friday, March 08, 2002 5:03 PM To: vanagon@GERRY.VANAGON.COM Subject: Alternator wobble? questions...

I noticed my alternator naking some light knocking noises so I checked it out today. Turns out there is some play in the shaft, I think it's from the bearing in the back of the housing. Also I noticed one of the little connectors came unsoldered in the back, it's the one that connects to the little black rubber box thing. What does that little box do anyways? There's two of them actually, another one connects to the little binding post for the little wires. Are any other people experiencing this play in their alternators? If I recall it's a rebuilt one I bought a while ago. I tried to take the darned thing apart, but the screws are on so darned tight and I stripped the phillips heads trying to get them off.

Joe


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.