Thanks for the response. I have tested the wire coming from the ignition module to the ECU and it is supplying a pulse to the ECU. Now the problem is that the fuel pump doesn't cycle on and off, as it formerly did, when the key is turned on but before the engine is started. Also, all of the injectors are open and spraying fuel constantly. I would appreciate any help solving this puzzle by locating the components on the circuit board which could contribute to this problem. Thanks. Rico |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.