Date:         Wed, 20 Mar 2002 15:38:20 EST
Reply-To:     JM060356@AOL.COM
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Jim Morgan <JM060356@AOL.COM>
Subject:      Re: hesitation/stalling loss of power
Comments: To: developtrust@cox.net
Content-Type: text/plain; charset="US-ASCII"

Got it running. Good call william the oxy sensor was all coged up .you could
not see
 the little slits all covered with carbon. Also the sensor was a universal
type and the signal wire was corroded at the soder connection, Was replaced
with the high dollar bosch long wire sensor . Thank you all for responding
with ideas .

Again thank you!!!!!!!

Jim Morgan 86GL
"Breadbox"

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.