Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (March 2002, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Thu, 21 Mar 2002 10:24:18 -0800
Reply-To:     Joseph Fortino <fortino1@ONEBOX.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Joseph Fortino <fortino1@ONEBOX.COM>
Subject:      Re: AMC heads------bad valves, replace when you buy the new head
Comments: To: mike <mwmiller@CWNET.COM>
Content-Type: text/plain; charset=us-ascii

so replace valves when replacing the heads would be a good idea? after looking at my new heads they are german type with the audi sign near by :)

I've been doing my heads/work over the course of a 2 month time. hehe

Time permits, but its killing me

-- Joseph Fortino fortino1@onebox.com - email

---- mike <mwmiller@CWNET.COM> wrote: > Every single shop/mechanic agrees on the valves being bad, and replaces > them > when using the heads. > > Mike > Still weeping over having to do 'the engine thing'. > > > From: "Smola, Tony" <TSmola@TRIBUNE.COM> > > Reply-To: "Smola, Tony" <TSmola@TRIBUNE.COM> > > Date: Wed, 20 Mar 2002 18:20:54 -0600 > > To: vanagon@GERRY.VANAGON.COM > > Subject: AMC heads------bad valves, replace when you buy the new > head > > > > My machinist here in L.A. has informed me that while the castings > are > > decent, the valves are crap on the Spanish AMC waterboxer cylinder > > heads.......he said that the keeper grooves are not hardened and > you will > > have valve problems in a relatively short time......He likes the > new German > > ones, but reccomends the used German ones, and he actually likes > using the > > German heads to rebuild if they are in a rebuildable condition......... > > > > prices------ > > > > $60 for valve job > > $60 for surfacing > > $32 install all new 1.9L valve guides > > $28 to install new exhaust guides > > $30 to weld faces > > > > total $210 for the pair.....of course if there are cracks to weld > the price > > goes up.....but the absolute max is $450 for the pair > > > > By the way I found new lifters for $7......probably AMC too! > > > > Malibu tony > > >

__________________________________________________ Voicemail, email, and fax...all in one place. Sign Up Now! http://www.onebox.com


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.