Date:         Fri, 15 Mar 2002 15:05:26 -0800
Reply-To:     Ron Lussier <rlussier@LENSCRAFT.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ron Lussier <rlussier@LENSCRAFT.COM>
Subject:      Re: [Syncro] All About 16" Wheels --CV-900s Have Arrived
Comments: To: Derek Drew <derekdrew@rcn.com>, Syncro@yahoogroups.com
In-Reply-To:  <4.3.2.7.2.20020315170245.041e2ed8@pop.rcn.com>
Content-type: text/plain; charset="US-ASCII"

On 3/15/02 2:04 PM, "Derek Drew" <derekdrew@rcn.com> wrote:

> This wheel's coating, which is a kind of hard slippery plasticy paint
> material, will resist the accumulation of brake dust, and so preserve a
> better appearance, according to manufacturer statements. California's HR
> Seth, among others, has pointed out that the superior South African brakes
> seem to have a problem in the brake dust area--making the wheels
> dirty--which problem we have not entirely solved yet. Seth suggests
> switching to alternate brake pads, whereas I see that there are now devices
> on the market to physically block the dust from coming out that side of the
> wheel. Possibly these wheels will help, but whether that is true is unknown
> yet.

I can confirm the problem with the south africa brakes and brake dust.  The
front wheels of my syncro are *much* dirtier than the rear wheels, which
look straight-from-the-detailer after several months.

Ron

--------------------------
ron lussier / lenscraft                         fine art giclee prints
                                                    67 crescent avenue
ICQ 23581466                                      sausalito / ca 94965
http://www.lenscraft.com/                              +1 415.331.3687