In a message dated 3/24/02 10:04:57 AM, debbwa@EARTHLINK.NET writes: << I got the job done without the pliers, but it was not easy. Is there really any such thing as these resetting pliars? >> Deb, The "resetting" pliers to which you are referring are use to adjust the angular position of the notches in the caliper piston on the '85 Vanagon. These notches have to engage the tabs stamped into the anti-squeal plates. Many different tools can be used or dedicated purpose ones fabricated to do this task. A pair of battery terminal pliers should work. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.