----- Original Message ----- From: "DaveC" <voicebox@dnai.com> To: "Raimund Feussner" <rfeussner@GMX.DE>; <vanagon@GERRY.VANAGON.COM> Sent: Saturday, April 06, 2002 5:05 PM Subject: Re: VR6 Vanagon
> > > Does the engine mate with the Vanagon trans without adapter? > > > >No. > > My question is about the VR6, not the Audi V6. Which is your answer > referring to? Both :-))) Audi V6 _and_ VW VR6 (now renamed also as V6) have a different bolt pattern than the square 4 bolts of the boxer tranny. Also the diesel bellhousing of the vanagon wonīt fit. But adapters are available for both engines. You can see the Audi adapter on www.vwbus-online.de/feussner (first or second page, donīt know anymore) Raimund |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.