In a message dated 4/3/02 11:04:02 AM, steveis@SPEAKEASY.ORG writes: << I'm lubing my shift linkage. Benteley . . . . . . why can't I just use white lithium? >> Steve, I used white lithium grease at one time because it was easily applied in the aerosol form and because most mechanics seems to use it on every exterior body joint/latch/hinge. This lubricant did not appear to last very long. Lately I have been using Dow-Corning brand, Molykote G-Rapid. Obviously, it is some form of molybdenum disulfide lubricant in an evaporating vehicle. According the Dow, it becomes burnished into the sliding surfaces and it is the salvation of all things mechanical. It is a dry lube, so it does not become charged with grit in use only to become some kind of crude and unwanted lapping compound. Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.