The easiest way to remove those clamps is to stick a screw driver (flat) in the space and twist. This loosens the clamp. The clamp can also be squeezed tight again with a plier and reused. Aloha, Ed
On Wed, 10 Apr 2002 19:18:21 -0700 Gerald Masar <azsun99@EARTHLINK.NET> writes: > If you were in the military or around aircraft or just been around, > you know FOD= > foreign object damage. Finishing up the overhaul of my cooling > system today, I removed > the plastic coolant distribution tower and when I pulled it off of > the short large > hose that connects it to the plastic pipe to the radiator, I reached > my finger in the > hose, as I always do, to check for debris. I felt something loose > and when I pulled it > out, it was the last 1/4" of the plastic pipe. Not the current one, > but the previous > one that was replaced some years ago. Been in there all this time, > but apparently not > obstructing flow. > > I found a way to remove the small crimped on hose clamps, that > worked better for me, > since I didn't have any suitable diagonal cutters. Using 3 > successively larger drill > bits, just drilled out the little loop at the top of the crimp until > it was thin > enough to bend and break. > > Jerry > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.