Date:         Wed, 10 Apr 2002 12:45:38 -0700
Reply-To:     Scott Sullivan <gersil0@LYCOS.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Scott Sullivan <gersil0@LYCOS.COM>
Organization: Lycos Mail  (http://mail.lycos.com:80)
Subject:      Re: Clutch Problem?
Content-Type: text/plain; charset=us-ascii

To what Chris suggested I would add that you look at the bolts holding the slave cylinder in place.  Soon after I had a clutch replaced one of the bolts came loose and the results were consistant to what you described.

Scot
--

On Wed, 10 Apr 2002 12:59:37
 Chris Stann wrote:
>Eric,
>
>A few things to check based on my experience, and I am sure others will add:
>
>1.  Brake fluid level - is it too low?  Air may have gotten into the system.
>2.  Have friend press clutch and check hydraulic clutch action at the
>transmission.  Are things moving like they should?
>3.  You may have air in the system - bleed.
>4.  Your slave cylinder maybe bad or going bad - check and replace.  Fairly
>easy except for that ONE bolt...
>
>I'll leave the rest to the list.
>
>Chris,
>
>'85 Westy
>


See Dave Matthews Band live or win a signed guitar
http://r.lycos.com/r/bmgfly_mail_dmb/http://win.ipromotions.com/lycos_020201/splash.asp