Date:         Wed, 10 Apr 2002 20:04:13 -0400
Reply-To:     Dennis Haynes <dhaynes@OPTONLINE.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dennis Haynes <dhaynes@OPTONLINE.NET>
Subject:      Re: Recommended brake pads?
Comments: To: BlackJack <jack@FERRET.NTS.LOGICON-LCIS.COM>
In-Reply-To:  <Pine.GSO.4.10.10204101648570.559-100000@ferret.nts.logicon-lcis.com>
Content-type: text/plain; charset=us-ascii

Brake noises are usually not the result of the pads themselves. You
should use new anti-squeal shims behind the pads and replace the spring
plate the sits between the pads and the retaining pins. These parts get
weak from heat and age. Always replace. Make sure the rotor surface is
good and the rotor has not worn below 11mm, and is not tapered.

Dennis


-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of BlackJack
Sent: Wednesday, April 10, 2002 6:51 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Recommended brake pads?

Hi All,

I'm wondering what folks are using to avoid that horrible squealing
sound?
I'm not sure what pads are on the 84 Westy now.  I assume that the
genuine
VW pads won't squeal but there are probably more cost effective
solutions.

Thanks much,

Jack