Date:         Fri, 12 Apr 2002 08:49:36 -0500
Reply-To:     Stan Wilder <wilden1@JUNO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stan Wilder <wilden1@JUNO.COM>
Subject:      Re: INVISIBLE BRA
Comments: To: gchallis@CENTUM.COM
Content-Type: text/plain; charset=us-ascii

I have INVISIBLE BRAs for sale at $199.00 postage paid.
When you open the shipping box it will appear that nothing is in there.
To install the bra, simply open the shipping carton and set it in front
of your Vanagon.
The Bra will climb out of its box and attach itself to your Vanagon
because it has special electromagnetic qualities.
If your neighbors point and laugh as you drive by, just ignore them. The
invisible bra will need about two days to fully extend and remove the
wrinkles. They won't be laughing anymore.
Once the bra has installed itself, it becomes permanent.
If your Vanagon requires paint touch up or frontal body repairs the body
shop will just paint right over the INVISIBLE BRA and you'll need to
order a replacement.
If your insurance adjuster gives you any problems about the replacement
bra, just show him your proof of purchase invoice.

Stan Wilder

On Thu, 11 Apr 2002 22:19:17 -0700 G Challis <gchallis@CENTUM.COM>
writes:
> I've heard a lot of good things about the 3M invisible bra material
> from
> people on the Mercedes ML list - if my front end wasn't already
> pitted I'd
> seriously consider it instead of a bra.  A lot of these guys use it;
> some
> companies sell kits with precut pieces for particular applications.
>
> A few companies make it:
> www.stongard.com
> www.invinca-shield.com
> www.xpel.com
> www.autobahnd.com (northeast area only)
>
> It's important that you find an installer you're comfortable with if
> you do
> go through with it.  Cost of materials is roughly $150 (on an ML).
> Most of
> it is
> relatively difficult labor (sorta like applying tint film).
>
> Graham
> 90 GL auto CHC
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On
> Behalf
> Of Andrew Bell
> Sent: Thursday, April 11, 2002 8:02 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: INVISIBLE BRA
>
>
> I was at my pal's shop in Minnesota observing a TIICO conversion,
> and
> noticed
> that the Van had something that 3M calls an "invisible bra". Anyone
> ever try
> it?
> it's some sort of clear poly shield that is on the front of the Van,
> looks
> like
> it almost a large clear sticker. Looks cool. Looks like it'll last
> and
> protect.
> The bra was on for about 5 years (so I was told) - looked great, as
> did the
> pain
> underneath...
>
> AB
>
> Steve Lashley wrote:
>
> > In a message dated 4/11/02 7:06:13 PM, Zapvw@AOL.COM writes:
> >
> > <<  also having to replace the nose panel since the rust
> > under the bra was so pervasive.
> >  >>
> >
> > I haven't heard of a bra causing rust.  Its more likely that you
> had a
> number
> > of dings on the nose before you started using the bra and the rust
> was
> > already developing.
> >
> > Steve Lashley
> > SKL Enterprises Inc.
> > http://EuroCampers.com
> > 636-797-9015
> > 636-789-2127 fax
>

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.