Date:         Sat, 13 Apr 2002 18:59:54 -0700
Reply-To:     Todd Last <Rubatoguy@MINDSPRING.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Todd Last <Rubatoguy@MINDSPRING.COM>
Subject:      Re: [Syncro] Installing Aussie chip
Comments: To: Brent Christensen <sbsyncro@hotmail.com>
Comments: cc: syncro@yahoogroups.com
Content-Type: text/plain; charset=us-ascii; format=flowed

My chip was unsoldered and had a socket. So it was just a matter of
pulling the old one out and pushing the new one in.

Todd
'88 Westy

Brent Christensen wrote:

>Well, as a follow up to my post yesterday about identifying my "mystery" ECU
>with the Bosch label (and no yellow label), it IS indeed compatible with the
>upgrade chip's 28 pins.  I had to pull the ECU apart in order to count the
>pins before I knew for sure.
>
>Now I also see that the chip must be *unsoldered* and the new one soldered
>in place. I am assuming this is the case, but I thought I would check with
>the List and do a quick sanity check before I bust out the "solder sucker"
>and iron..
>
>Can anyone confirm for me that the old chip must be unsoldered and the new
>one soldered in place?  Also, I am assuming that the alignment of the new
>chip is done by using the notch in the end of the chip (and matching it to
>the same notch location in the old chip's placement?
>
>Also, it may be a week before I get the rockers installed - anyone tried the
>chip without the rockers?  Any problems?  (I am assuming not - just a bit
>more rich operation when warm...)
>
>I have pictures, and will be documenting the entire process in case anyone
>is curious...
>
>Brent Christensen
>'89 GL Syncro Westy
>Santa Barbara, CA
>
>
>_________________________________________________________________
>Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
>
>
>If you would like to modify your subscription settings (including unsubscribing), visit:
>http://groups.yahoo.com/group/Syncro
>Please remember that rude or offensive language is not allowed on the Syncro list. Please try your best to resolve differences privately and keep them off the list.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>