> The rear KYB's"for vanagon" I ordered from Bus-depot > wont fit inside the top and bottom brackets-(where > they mount to the frame) becouse the shock mounts are > too wide-(where the bolt slides through the shock) > > Should I grind the shock mounts down 1/4" so they'll > fit or send them back?
The correct rear KYB shocks for a Vanagon are KG5557. This number should be on the end of the box and usually stamped into the shock as well (along with a manufacturing code). If this is what you have, and they don't fit, then you did something wrong. If this is not what you have, then we did something wrong. :-) - Ron Salmon The Bus Depot, Inc. (215) 234-VWVW www.busdepot.com _____________________________________________ Toll-Free for Orders by Part # 1-866-BUS-DEPOT |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.