Jay, I would appreciate if you could tell me more as where to check the voltage for the OS. Didn't find any simple explanation in the Bentley. Do you mean checking the voltage from the van, or checking in parallel when van is running with the OS plug? More info please in good and simple English (I'm French) Regards, Ben What I mean is an unplug OS as no voltage, so it need to be plug! If it's plug and you check in parallel, you will get the van voltage??? Also, on the 3 wire OS, the 2 white one are for heating, the green one is for the sensor by it self. Where to put the 2 Meter wire? Between chassis and connector? Check my site at the following link and tell me a combination of letter to do this check http://pages.infinit.net/engine/os_sensor.htm Regards, Ben |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.