Date:         Sat, 20 Apr 2002 09:23:48 -0600
Reply-To:     Ben McCafferty <ben@KBMC.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Ben McCafferty <ben@KBMC.NET>
Subject:      Re: Anyone have a stabilizer bar linkage they would be willing to
              part out?
Comments: To: sanford schulwolf <sanfordachulwolf@YAHOO.COM>
In-Reply-To:  <20020420054425.41933.qmail@web20310.mail.yahoo.com>
Content-type: text/plain; charset="US-ASCII"

By the way, Sanford, this is a syncro-specific part--don't remember if you
needed it for a syncro or 2WD?
bmc  :)
"Faith will move mountains, but you'd better bring a shovel...."


> From: sanford schulwolf <sanfordachulwolf@YAHOO.COM>
> Reply-To: sanford schulwolf <sanfordachulwolf@YAHOO.COM>
> Date: Fri, 19 Apr 2002 22:44:25 -0700
> To: vanagon@GERRY.VANAGON.COM
> Subject: Anyone have a stabilizer bar linkage they would be willing to part
> out?
>
> Hello List,
>
> While starting the job of repackaging all of my CV
> joints on my 91 syncro, I broke the bolt and screw end
> off of my left side "stabilizer bar linkage."  Its not
> repairable but I am hoping someone in their parts bind
> (or pile) might have an extra stabilizer bar linkage
> (screws into the lower control arm and
> connects via a rubber bushing to the main stabilizer
> bar - I only need the piece from the control arm to
> the bushing.)  If you have one or a direction to run
> in, please let me know.
>
> Many Thanks,
> Sanford
>
> 91 syncro Westy
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Games - play chess, backgammon, pool and more
> http://games.yahoo.com/
>