Date:         Sun, 21 Apr 2002 17:08:28 -0700
Reply-To:     phil stanhope <napszeerf@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         phil stanhope <napszeerf@YAHOO.COM>
Subject:      Re: KYB Shocks wont fit(rear).....Grind em down?
In-Reply-To:  <IBEMIMEBBBEOIIGIKKAHAEDJEKAA.vanagon@busdepot.com>
Content-Type: text/plain; charset=us-ascii

"If this is what you have,
> and they don't fit, then
> you did something wrong. If this is not what you
> have, then we did something
> wrong.  :-)"


No my friend, I did nothing wrong perhaps the PO did
something wrong but I did nothing wrong:-)

The numbers you just gave me match with my KYB shock
boxes so I think what happened was the PO installed
the wrong/smaller shocks and fastened down on the nut
and bent in the brackets inward significantly. Maybe I
can pry them out to fit the KYB's but that will have
to be another weekend thanks for the help.

Phil




--- The Bus Depot <vanagon@busdepot.com> wrote:
> > The rear KYB's"for vanagon" I ordered from
> Bus-depot
> > wont fit inside the top and bottom brackets-(where
> > they mount to the frame) becouse the shock mounts
> are
> > too wide-(where the bolt slides through the shock)
> >
> > Should I grind the shock mounts down 1/4" so
> they'll
> > fit or send them back?
>
>
>
> The correct rear KYB shocks for a Vanagon are
> KG5557. This number should be
> on the end of the box and usually stamped into the
> shock as well (along with
> a manufacturing code).  If this is what you have,
> and they don't fit, then
> you did something wrong. If this is not what you
> have, then we did something
> wrong.  :-)
>
> - Ron Salmon
>   The Bus Depot, Inc.
>   (215) 234-VWVW
>   www.busdepot.com
>
> _____________________________________________
> Toll-Free for Orders by Part #    1-866-BUS-DEPOT
>
>
>


__________________________________________________
Do You Yahoo!?
Yahoo! Games - play chess, backgammon, pool and more
http://games.yahoo.com/