Date: Thu, 18 Apr 2002 21:35:48 -0400
Reply-To: "Carrington, Tom" <TCarrington@RELITECH.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "Carrington, Tom" <TCarrington@RELITECH.COM>
Subject: FW: cranks over, but it will not even sputter
Content-Type: text/plain
Please reply to the sender, not me.
> -----Original Message-----
> From: Dan Eggert [SMTP:daneggert920@msn.com]
> To: vanagon-request@GERRY.VANAGON.COM
> Subject:
>
>
>
>
> Hello everyone,
> I am having a problem with my 83 air cooled vanagon and I need some help
> trying to figure out what the actuall problem is. If you are going to
> send me some info please send it to my personal address since I am no
> longer subscribed to the list since I do not have easy access to the
> internet daneggert920@msn.com
> <http://pv0fd.pav0.hotmail.msn.com/cgi-bin/compose?mailto=1&msg=MSG1017781
> 381.10&start=152537&len=4273&src=&type=x&to=daneggert920%40msn%2ecom&cc=&b
> cc=&subject=&body=&curmbox=F000000001&a=3dab9e303cdd852535f132f00f2fbfe7>
> Thanks
> -Right now it will not even start! It cranks over, but it will not even
> sputter. I replaced my points a while back and I don't think I got it set
> right (no dwell metter, my bad) and since then I have had weird problems.
> I can drive it for a while and when I shut it off for a few minutes, it
> will sometimes not start unless you let it sit for about forty-five
> minutes and then it will start just fine. The idle was a little rough and
> my gas mileage dropped, why I think I never had the points set right. I
> just changed the oil the other day and when I started it up it ran fine
> for about a minute, had pressure and all, then the idle got extremely
> rough and then it died. I can't get it to idle. I reset the points and
> that seemed to help just a bit, but it still would keep stalling out. The
> distributer and rotor looked pretty crappy so I changed them along with a
> new set of points and condensor. The plugs looked fine. I even went out
> and got a dwell meter so I could set the points right. Now, no matter what
> I set the points to, it will not start! and I have not been able to work
> with anyone so I can't check the dwell by myself. Any suggestions? I
> need help.
> Thanks everyone, please send replies to daneggert920@msn.com
> <http://pv0fd.pav0.hotmail.msn.com/cgi-bin/compose?mailto=1&msg=MSG1017781
> 381.10&start=152537&len=4273&src=&type=x&to=daneggert920%40msn%2ecom&cc=&b
> cc=&subject=&body=&curmbox=F000000001&a=3dab9e303cdd852535f132f00f2fbfe7>
> Dan
>
>
>
>
>
>
>
>
> Dan Eggert
> daneggert920@msn.com <mailto:daneggert920@msn.com>
> www.daneggert.com <http://www.daneggert.com/>
>
>
>
>
>
|