It is a bit tricky to get this pipe in place. The pipe the attaches to the head on the left side goes in front of the engine support. The right pipe actually goes behind the support. Hope this helps. Dennis
-----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Buffy & Philip Simmons Sent: Wednesday, April 24, 2002 8:42 PM To: vanagon@GERRY.VANAGON.COM Subject: Exhaust Questions Ok, I think I have the problem, but need some advice from the experts here. I have the carrier bolted properly (arrows forward), and have isolated the rear header pipe. It still will not mount, but I think perhaps it was bent when I dropped the engine. I have the pics here http://members.cox.net/buffy-philip1/ And would appreciate if you could look and see if this looks like yours (I don't have another to compare, but think that perhaps it is bent) Would like to confirm prior to ordering a new one Thanks!
Philip |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.