In a message dated 4/23/02 11:15:18 PM, buffy-philip1@COX.NET writes: << It will not fit behind the motor mount bar (it falls ~3" short of the head) and it will not fit in front of the motor mount (the pipe needs to be in the same physical location as the motor mount bar on the drivers side). Cant believe this will not bolt up.It came out ok.its almost like the installation is different than when I pulled, but I bolted it up and the tranny is mated to the motor. >> buffy, Which way are the arrows on the motor mounting bar ends pointing? You did check them, didn't you? Rich |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.