Date:         Thu, 25 Apr 2002 13:35:58 -0700
Reply-To:     Greg Stelz <gstelz1@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Greg Stelz <gstelz1@YAHOO.COM>
Subject:      Re: swivel seat
Content-Type: text/plain; charset=us-ascii

If you don't have the swivel seat option, its pretty
easy take the passenger seat off the seat tracks and
install it facing the rear.  There is a little spring
loaded clip that you need to raise while pulling the
seat forward in order to remove the seat.  I do this
all the time when I go camping, takes about 1 minute.
I thought about welding in the swivel mount when I did
my conversion, but decided I didn't want to compromise
safety in an accident.

Greg Stelz
86 van to westy conversion
Columbus, Ohio

Date:    Wed, 24 Apr 2002 20:56:36 -0700
From:    G Challis <gchallis@CENTUM.COM>
Subject: Re: swivel seat

I've done this on my 90GL.  Search the archives for
info. but basically
you
get a swivel seat base that's been cut out of a westy,
then either
drill and
bolt it into your van, or better yet get it welded in
place.  Your seat
slides in with no problem.  I think any year swivel
seat base will
work, the
main thing is to make sure it was cut out of the donor
vehicle nicely.

Graham
90 GL auto CHC

-----Original Message-----
From: Vanagon Mailing List
[mailto:vanagon@gerry.vanagon.com]On Behalf
Of Clarence J Falarski
Sent: Wednesday, April 24, 2002 5:45 PM
To: vanagon@GERRY.VANAGON.COM
Subject: swivel seat


__________________________________________________
Do You Yahoo!?
Yahoo! Games - play chess, backgammon, pool and more
http://games.yahoo.com/