Good Morning, I'll be putting the fuel tank back in my '82 diesel van this weekend. As far as the order of reinstall: Is it easier to put the little white elbows in the tank first, then try to attach that cross line between the two elbows as you go back up? Or should I connect all the lines to the little white elbows first, then try to jam them in the tank from the wheel well as you go up? I made all the vent lines long enough to attach to the tank with it down, but there's that wider cross tank line between the elbows that sits above everything that looks like a pain to get attached again. Looking for advice on how others have done this... Thanks, Chris |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.